{"id":3640,"date":"2026-11-03T12:45:45","date_gmt":"2026-11-03T04:45:45","guid":{"rendered":"http:\/\/www.phuctamanvn.com\/blog\/?p=3640"},"modified":"2026-11-03T12:45:45","modified_gmt":"2026-11-03T04:45:45","slug":"what-is-the-power-factor-control-strategy-of-a-pfc-power-supply-45cc-9ac5b6","status":"publish","type":"post","link":"http:\/\/www.phuctamanvn.com\/blog\/2026\/11\/03\/what-is-the-power-factor-control-strategy-of-a-pfc-power-supply-45cc-9ac5b6\/","title":{"rendered":"What is the power factor control strategy of a PFC Power Supply?"},"content":{"rendered":"

Hey everyone, if you\u2019ve ever dug into power supplies\u2014especially the ones that keep your laptop, server rack, or home gaming setup humming without random stutters\u2014you\u2019ve probably heard the term \u201cPFC\u201d thrown around. I\u2019m [just a regular from our team, no fancy corporate title], and as someone who\u2019s spent years working with PFC power supplies (we\u2019ve built thousands, and I\u2019ve got the t-shirts to prove it), one question I get all the time is: \u201cHow does that power factor control thing even work?\u201d Let\u2019s break this down like we\u2019re chatting over a coffee, no textbook jargon (well, maybe a little, but we\u2019ll keep it simple). PFC Power Supply<\/a><\/p>\n

<\/p>\n

First, let\u2019s get the basics out of the way so we\u2019re all on the same page. Power factor (PF) is basically how \u201cefficient\u201d your power supply is at using the electricity coming out of the wall. Think of it like ordering a pizza: if you ask for a large with 8 slices and you eat all 8, that\u2019s a PF of 1.0 (perfect efficiency). But if you only eat 5 slices and throw the rest away, that\u2019s a lower PF\u2014you paid for 8, only used 5. Older power supplies, especially the cheap ones, had PFs around 0.6 or 0.7, which means 30-40% of the wall power was just wasted as heat or bounced back to the grid. That\u2019s not just a hassle for your device\u2014it\u2019s bad for utility companies, too, who have to build bigger grids to handle that wasted power.<\/p>\n

Enter PFC (Power Factor Correction) power supplies, and the magic sauce that makes them work: power factor control strategies. These aren\u2019t one-size-fits-all, and over the years, we\u2019ve tested a bunch of different ones to figure out what works best for the real-world stuff our customers deal with\u2014like running a server farm, a retail LED display wall, or even a fleet of electric vehicle chargers. Let\u2019s walk through the main strategies we use, why we picked them, and how they make a difference.<\/p>\n

First up, passive PFC\u2014this is the old-school, simpler version, and it\u2019s still useful for low-power applications (think under 200W, like a small desktop speaker or a basic phone charger). Passive PFC works by adding a big inductor (that\u2019s a coil of wire, for the non-engineers) in the input circuit. The inductor smooths out the current coming from the wall so it lines up better with the voltage. The downside? It\u2019s bulky\u2014you can\u2019t stick a huge inductor inside a tiny laptop charger\u2014and it can only get you a PF of around 0.9, which is good, not great. We still use this for entry-level products, but most of our mid-to-high-power stuff uses active PFC, which is where the real power is.<\/p>\n

Active PFC is the workhorse of modern PFC supplies, and it uses semiconductors (think MOSFETs, diodes\u2014fancy switches) and controllers to actively adjust the current to match the voltage, not just smooth it. Now, even active PFC has different control strategies, and this is where the expertise matters. As a supplier, we\u2019ve tested a few of these, and two stand out for reliability and efficiency: constant on-time (COT) control and average current mode (ACM) control.<\/p>\n

Let\u2019s start with average current mode control. This is the old reliable, the one engineers have relied on for decades. Here\u2019s how it works: the controller chip constantly measures the actual current going into the supply, compares it to a \u201creference\u201d current (which lines up perfectly with the AC voltage sine wave), and adjusts the MOSFET switch to make the real current match the reference. It\u2019s like a thermostat for your power supply: if the room (current) is too cold (low), it kicks the heat on; if it\u2019s too hot (high), it turns it down. The big plus here is that it\u2019s super stable, even when the input voltage bounces a little (like when your neighbor runs their big AC unit and dips the line voltage). For our customers running 24\/7 server systems, stability is non-negotiable\u2014we rarely get calls about our ACM-controlled supplies acting up. The downside? It needs a few extra components (like a current sense resistor) and is a bit more complex to design, which is why it took a while to get affordable for mass production.<\/p>\n

Then there\u2019s constant on-time control, which has blown up in popularity the last 10 years, especially for smaller, lighter power supplies. Instead of measuring current to adjust the switch, COT control just sets a fixed amount of time the MOSFET is \u201con\u201d every cycle. The length of that on-time changes based on the input and output voltage, but it\u2019s way simpler\u2014fewer parts, smaller size, faster to respond to sudden changes in load. For example, if you\u2019re gaming on your laptop and suddenly crank up the GPU, COT control adjusts the current almost instantly, so you don\u2019t get a tiny blip in your screen or a spike in power draw. The only catch? It can be a little less stable at very low loads, but we\u2019ve tweaked our design to fix that\u2014adding a small capacitor to smooth things out, so even at 10% load (like when your laptop is idle and just browsing), the PF stays above 0.95, which is awesome.<\/p>\n

Wait, there\u2019s also discontinuous conduction mode (DCM) vs. continuous conduction mode (CCM) for active PFC\u2014let\u2019s not skip those, because they\u2019re tied to the control strategy. DCM is when the current in the inductor drops all the way to zero between switch cycles, which is simple and good for low-power, low-cost supplies, but it can create more noise (that high-pitched whine you hear from some chargers). CCM is when the current never hits zero, so it\u2019s smoother, quieter, and more efficient for high-power stuff\u2014like a 1kW supply for a retail display wall. Most of our mid-to-high-power products use CCM with either COT or ACM control, because the noise reduction alone is worth it for customers who don\u2019t want their store\u2019s display humming at 2am.<\/p>\n

Now, why does this all matter for you, the customer? Let\u2019s put it in real numbers. A non-PFC power supply might have a PF of 0.6, which means for every 1000W of power you draw, you\u2019re using 600W and wasting 400W as heat. With our active PFC supplies using CCM and COT control, we get a PF of 0.99\u2014so almost 100% of the power from the wall is used. That means lower electricity bills, less heat buildup inside your device (which extends its life), and compliance with energy codes (like the US DoE\u2019s Level VI standard or EU\u2019s ErP regulations). We\u2019ve had a customer who runs 500 LED signs in a mall switch to our PFC supplies, and they cut their monthly electricity bill by $1,200\u2014no joke, that\u2019s the kind of impact we see.<\/p>\n

But here\u2019s the thing: not all PFC control strategies are created equal. A lot of cheap suppliers will slap a passive PFC in a supply and call it \u201cPFC-enabled,\u201d but it only gets a PF of 0.7, which is barely better than nothing. Or they\u2019ll use a low-cost active PFC controller that cuts corners, leading to lower efficiency or reliability issues. As a PFC supplier, we don\u2019t cut those corners. Every one of our designs is tested in-house: we run them for 10,000 hours straight in a thermal chamber (simulating 100\u00b0F heat, high humidity) to make sure the control strategy doesn\u2019t degrade over time, and we test PF at every load\u2014from 10% to 100%\u2014to make sure it stays high no matter what your device is doing.<\/p>\n

We also tailor the control strategy to the customer\u2019s needs. For example, a customer building a portable charging station for EVs needs a small, lightweight supply, so we use COT control with a compact inductor. A customer building a 5kW data center UPS needs maximum stability, so we use ACM control with extra filtering to handle the constant load changes. It\u2019s not a one-size-fits-all approach, which is why we spend time talking to our customers before we even start designing a supply.<\/p>\n

Wait, let\u2019s clear up a common misconception some people have: PFC control isn\u2019t just about PF number. It\u2019s also about power quality. Wasted power from low PF can cause voltage drops in the grid, which messes up sensitive electronics\u2014like the sensors in a factory line, or the cameras in a security system. Our PFC supplies have low total harmonic distortion (THD), which is another big metric. THD is how much the current deviates from a perfect sine wave; we keep our THD below 5%, which is way better than the 20% limit many energy codes allow. That means no more weird glitches in your devices, even when multiple power supplies are running next to each other.<\/p>\n

So, how do we make sure our control strategies stay up to date? We work closely with our engineering team, who are constantly testing new controller chips and tweaks\u2014last year, we added a digital control module to some of our supplies, which lets the controller adjust the current in real-time based on actual load, instead of just following a fixed reference. That pushed our PF even higher, up to 0.995 at full load, and reduced standby power by 30%\u2014which is a big deal for devices that are plugged in all the time, like security cameras or smart thermostats.<\/p>\n

Now, if you\u2019re here, you\u2019re probably someone who\u2019s looking for a reliable PFC power supply\u2014whether you\u2019re an engineer designing a new product, a facility manager upgrading your store\u2019s power, or just someone sick of high electricity bills and flaky power supplies. Here\u2019s the thing: the power factor control strategy is the backbone of a good PFC supply. Cheap supplies cut corners here, but our team\u2019s expertise in different control strategies is what makes our products stand up to real-world use.<\/p>\n

<\/p>\n

We don\u2019t just sell power supplies\u2014we build them with the people who use them in mind. If you\u2019re looking to upgrade your current supply, or you\u2019re designing a new device and want to make sure it meets energy codes, stays efficient, and doesn\u2019t have random power issues, we\u2019d love to chat. We can walk you through which control strategy makes sense for your application, answer any questions about PF, efficiency, or reliability, and even help you design a custom supply if you need it. No sales jargon, no pressure\u2014just a team that\u2019s been doing this for years, and knows what works.<\/p>\n

Enclosed Switching Power Supply<\/a> References<\/p>\n

    \n
  1. Mohan, N., Undeland, T. M., & Robbins, W. P. (2003). Power Electronics: Converters, Applications, and Design (3rd ed.). John Wiley & Sons.<\/li>\n
  2. United States Department of Energy. (2021). Energy Efficiency Standards for External Power Supplies.<\/li>\n
  3. ErP Directive 2009\/125\/EC. (2019). Ecodesign Requirements for Power Supplies.<\/li>\n
  4. Mazumder, S. K., Nayak, R., & Agarwal, A. (2007). Average Current Mode Control of Single-Phase PFC Converters. IEEE Transactions on Power Electronics.<\/li>\n
  5. Ridley, R. B. (1990). A New Small-Signal Model for Current-Mode Control. IEEE Transactions on Power Electronics.<\/li>\n<\/ol>\n
    \n

    Guangzhou Kaihui Electronics Co., Ltd.<\/a>
    Guangzhou Kaihui Electronics Co., Ltd. is one of the most professional pfc power supply manufacturers and suppliers in China, specialized in providing the best customized service. We warmly welcome you to buy high quality pfc power supply made in China here from our factory.
    Address: 2F BLDG8, Standard Ind.Park, Dongchong Town, Nansha District 511453, Guangzhou, Guangdong, China
    E-mail: amy@gzkaihui.com
    WebSite:     https:\/\/www.kaihuipowersupply.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, if you\u2019ve ever dug into power supplies\u2014especially the ones that keep your laptop, server … What is the power factor control strategy of a PFC Power Supply?<\/span>Read more<\/a><\/p>\n","protected":false},"author":109,"featured_media":3640,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3603],"class_list":["post-3640","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pfc-power-supply-4b10-9b0787"],"_links":{"self":[{"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/posts\/3640","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/users\/109"}],"replies":[{"embeddable":true,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/comments?post=3640"}],"version-history":[{"count":0,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/posts\/3640\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/posts\/3640"}],"wp:attachment":[{"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/media?parent=3640"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/categories?post=3640"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.phuctamanvn.com\/blog\/wp-json\/wp\/v2\/tags?post=3640"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}